[Elecraft] Digital voice recorderfor
Doug Turnbull
turnbull at net1.ie
Fri Dec 10 04:36:57 EST 2010
Would it be possible to allow an option where two of the memories might be combined to give a 20 second period with only one button being pressed to play back. I am fortunate here to have 15 second memory and so it is not a problem for me. The K3 is much better than my other rig with built in memory in which two of the memories are only 5 seconds long for phone recording. Whatever the length we will always want more but fifteen seconds does seem to be very adequate while perhaps ten seconds is tight.
73 Doug EI2CN
-----Original Message-----
From: elecraft-bounces at mailman.qth.net [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Johnny Siu
Sent: 10 December 2010 02:36
To: Andrew Faber; k6dgw at foothill.net; Elecraft Reflector
Subject: [Elecraft] Digital voice recorderfor
Hello Gentleman,
If possible, it is always convenient to have the ability to record longer
message say 20-30 secconds in one of the M1 - M4. Perhaps, Elecraft may wish
to search for newer components to upgrade the existing KDVR3.
Icom and Yaesu radio or even the MFJ Voice Keyer can record a much longer
message in at least one of the memories.
Of course, I have no knowledge of the cost of production for a new KDVR3
with the ability to record longer messages. If the cost increase in only
marginal, this feasibility in message length will be an operation convenience to
operator and hence better marketability of KDVR3.
In the firmware level, I don't know whether it is possible for the operator to
re-allocate the recording time among the M1-M4 and AF recording. For example,
M1-max 30 sec, M2-max 20 sec, M3 to M4 - max 10 sec. The remaining recording
time will be left for AF recording which will then be shorten to less than the
current 90 seconds.
The latest version of KDVR3 only gives 10 sec per M1-M4 which is too short.
It is not quite enough to record a proper standard CQ calling such as 'cq cq cq
vr2xmc vr2xmc vr2xmc (phonetics) calling and standing by'
cheers,
Johnny VR2XMC
----- 郵件原件 ----
寄件人﹕ Andrew Faber <andrewfaber at ymail.com>
收件人﹕ k6dgw at foothill.net; Elecraft Reflector <elecraft at mailman.qth.net>
傳送日期﹕ 2010/12/10 (五) 9:23:28 AM
主題: Re: [Elecraft] [K3] Re: Digital voice recorderfor
Fred,
In CQPWIN, I did work out a way to measure the precise length of each
message so you can have accurate repeat intervals for each message, even if
they are of differing lengths. If any logging software types are curious,
I'll be happy to share the approach taken.
73,andy, ae6y
----- Original Message -----
From: "Fred Jensen" <k6dgw at foothill.net>
To: "Elecraft Reflector" <elecraft at mailman.qth.net>
Sent: Thursday, December 09, 2010 3:11 PM
Subject: Re: [Elecraft] [K3] Re: Digital voice recorderfor
> Yep. I did it in ARRL SS Phone with N1MM. You just have to set a
> repeat interval long enough for the CQ plus your desired listening time.
> N1MM doesn't know anything about the DVK, it just sends the Mx tap
> emulation command, so it has no idea when your CQ is finished. I think
> this is true for most loggers.
>
> 73,
>
> Fred K6DGW
> - Northern California Contest Club
> - CU in the 2011 Cal QSO Party 1-2 Oct 2011
> - www.cqp.org
>
> On 12/9/2010 9:33 AM, K5WA wrote:
>
>> If this is in a contest, could you use the contesting software to trigger
>> the repeated CQs? From your comment, this would bypass the REPEAT DVR
>> function and allow the VFO B display, right? I have not tried it but
>> that
>> is how I would attempt it if I was setting up for a contest.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
More information about the Elecraft
mailing list