[Elecraft] [K3] Need for advice was; noise reduction

Wayne Burdick n6kr at elecraft.com
Mon Dec 6 13:09:54 EST 2010


Note that we already have an extensive FAQ page for the K3:

    http://www.elecraft.com/K3/K3FAQ.htm

There are many operating tips on this page, categorized by mode, etc.  
NR is one of the areas covered.

Would this be a good place to add more extensive operating advice?  
This page can be updated much more easily than the owner's manual.

73,
Wayne
N6KR



On Dec 6, 2010, at 9:51 AM, Edward Dickinson, III wrote:

> Hi Pete,
>
> Your thoughts regarding usage and perhaps techniques may have some  
> merit.  A
> web page or perhaps PDF document may be appropriate for  
> distribution.  With
> modest resources, either might be created.
>
> Have you considered offering to be a clearing house for such  
> information
> regarding 'how's' that might be provided by fellow Elecraft users?  I
> suspect that offering here on the Elecraft reflector might give you  
> some
> good material from others for a start.  With a little success in  
> format and
> content, even more might be encouraged to participate.  Sources such  
> as
> names and call signs of contributors might be included.
>
> If all passes muster, Elecraft might provide a link to a download or
> webpage.
>
>
> Good luck & 73,
> Dick - KA5KKT
>
> ----------------------------------------------------------------------------
> ----
>
> One of the things that strikes me reading through the manual is how
> little advice there is in it about how to use the K3, as opposed to
> documenting its features.  I'm sure that the defaults probably  
> represent
> their best judgment in many cases, and that the guys probably  
> despaired
> at anticipating the needs of such a diverse community, without  
> coming up
> with a 300-page book, but when the manual doesn't even suggest whether
> to use ADC-F or AGC-S for various modes, I think that's being a little
> too "neutral."
>
> Question is how can we, as a user community, fill this gap?  Maybe the
> VA3CR web page for the 1000MP series offers a possible model.  Any
> volunteers?
>
> -- 
> 73, Pete N4ZR
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html



More information about the Elecraft mailing list