[Elecraft] K3 Calibration

[Edward R. Cole]

There is another way to calibrate (though I have not tried it yet):

Transmit a carrier and measure the frequency on an accurate freq. 
counter.  My counter is good to 26-GHz with resolution to one 
Hz.  With it I found my K3 is off -6Hz on 20m and -16Hz on 6m.  The 
counter is referenced to a Rubidium standard.

Adjust the TCXO3 to zero the error at the highest freq.


73, Ed - KL7UW, WD2XSH/45
======================================
BP40IQ   500 KHz - 10-GHz   www.kl7uw.com
EME: 144-800*w, 432-100w, 1296-testing*, 3400-winter?
DUBUS Magazine USA Rep dubususa at hotmail.com
======================================
*temp not in service