[Elecraft] APF Ergonomics

[Rick Dettinger]

Tom,

I think you can use PF1 or 2 to select the APF.  This will still  
require a "hold", and an inadvertent tap will interfere with the RIT  
setting.  Don't know if this will be better.  I don't use my RIT so I  
like this set up.  Maybe a "slight" firmware change would allow each  
user to define which function is "tap" and which is "hold".  I  
probably should have put a "grin" symbol after that one!  :-)

73,

Rick Dettinger   K7MW


On Dec 5, 2010, at 11:54 AM, <n2cu at roadrunner.com>  
<n2cu at roadrunner.com> wrote:

> Why was the XFIL button chosen to enable APF? Is it because you  
> can't have APF and Dual PB at the same time? This weekend I found  
> myself inadvertently changing the XFIL instead of enabling APF.  
> Pileups get quite interesting when switching to a 2.7kHz roofer by  
> mistake.
>
> I would have preferred using the AFX button for enabling APF, since  
> it is an audio effect and the second function doesn't apply to CW.
>
> 73,
> Tom N2CU <><
> K3 #3582
> --
> 73,
> Tom N2CU <><
> K3 #3582
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html