[Elecraft] [K3] Shorting K3 PHONE jack outputs (WAS OT: Stereo to mono adapters)
Don Wilhelm
w3fpr at embarqmail.com
Fri Dec 3 17:13:33 EST 2010
Fred,
That "circuit" nomenclature has a lot of other people confused, and even
some confusion has crept into parts catalogs (but not the mainstream
distributors). I have seen stereo plugs and jacks called both 2 circuit
and 3 circuit - I guess they might refer to the number of pins - then
there may be extra contacts in the jack and I have seen a mono jack with
a closed circuit output pin also referred to as a 3 circuit jack - I
guess was because it has 3 pins (circuits?). Talk about being confused
- and frustrated after you receive the order - I won't order from that
source again.
73,
Don W3FPR
On 12/3/2010 5:03 PM, Fred Jensen wrote:
> What is a "3-circuit phone plug?" I know about 1-circuit plugs
> [tip-sleeve providing one circuit] and 2-circuit plugs [tip-ring-sleeve
> providing two circuits -- tip-sleeve and ring-sleeve]. Is this
> referring to 2-wire and 3-wire plugs? I've seen on the list here that
> the wrong plug will blow the AF amplifier.
>
> I followed the legends on the back panel and I don't use the front panel
> mic or headfone jacks. Where it said MONO, I use a 1-circuit plug,
> STEREO gets a 2-circuit plug. I use cables from Radio Shack between
> sound card and radio and they seem to work fine. I really hope I'm not
> screwing something up in my radio.
>
> 73,
>
> Fred K6DGW
> - Northern California Contest Club
> - CU in the 2011 Cal QSO Party 1-2 Oct 2011
> - www.cqp.org
>
> On 12/3/2010 12:38 PM, Don Wilhelm wrote:
>> James,
>>
>> That is incorrect. If you plug a 3.5mm mono plug into the adapter, it
>> will short between the ring and sleeve on the 1/4 inch side too.
>>
>> 73,
>> Don W3FPR
>>
>> On 12/3/2010 2:45 PM, James Sarte (K2QI) wrote:
>>> I'm assuming however that a 2 circuit plug into a 3 circuit adapter should
>>> be fine; i.e. plugging a 3.5mm mono plug into 1/4" stereo to 3.5mm stereo
>>> adapter, which is then inserted into the 1/4" phone socket?
>>>
>>> Tnx,
>>> James K2QI
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
More information about the Elecraft
mailing list