[Elecraft] OT: Stereo to mono adapters

[James Sarte (K2QI)]

OK, I think I got it now...

Here's what I plan to do:

Stereo to mono adapter -----> ANEM AF DSP ------> mono to stereo adapter
-------> headphones.

The stereo to mono adapter that I already have will combine audio from both
main and sub receivers into a single channel.  The mono to stereo adapter on
the other end of my headphones will then take that mono signal and output
into both cans for a simulated stereo experience.

73,
James K2QI

On Thu, Dec 2, 2010 at 10:02 PM, James Sarte (K2QI) <k2qi.nyc at gmail.com>wrote:

> Hi Ken,
>
> That is not my intent.  What I'm trying to do is combine both L&R audio
> channels from the K3's phone output into a mono signal.  That mono signal
> will then go into my BHI ANEM which only accepts a mono input.  The ANEM's
> output is also mono.  I then want to be able to connect my stereo headphones
> into the ANEM and still get audio out of the L&R cans rather than just one.
>
> I can't seem to determine exactly what adapter is required.  Is it a mono
> plug to stereo jack, or stereo jack to mono plug?
>
> I have one of these, which is a stereo plug to mono jack adapter, but mixes
> both L&R sources into a single channel:
> S2M-Adapter-250.gif<http://www.scansound.com/xcart/images/P/S2M-Adapter-250.gif>
>
> I'm assuming then that I'll need this, which is a mono plug to stereo jack:
> Mono-to-Stereo-Adapter-250.gif<http://www.scansound.com/xcart/images/P/Mono-to-Stereo-Adapter-250.gif>
>
> I also assume that it's safe to bridge both L&R channels from the front or
> rear phone (not SPKR) jacks?
>
> 73,
> James K2QI
>
>
>