[Elecraft] K3: 'Bad' memory channel, PLL 1 * 0

[Wayne burdick]

Confirmed, and on my short list. 

Tnx
Wayne
N6KR

Sent from my iPad

On Aug 29, 2010, at 3:52 AM, Stephen  Prior <sjp at sjprior.fsnet.co.uk> wrote:

> I have flagged this up before but had no replies, but I have more info now.
> 
> I have 5.366.50 USB as one of my * memory channels for 60m.  Rotating
> through the channels clockwise on VFO A is fine but counterclockwise, when I
> get to 5.366.50 the audio goes quiet and the PLL 1 reads *0.0 as if the loop
> has lost lock.  It's always this channel, and only ever when moving through
> the starred channels counterclockwise.
> 
> This frequency is stored in memory number 23.  When it is operating normally
> on this channel, PLL1 = 5.4
> 
> It's not a show stopper, but I'm curious.  I had the same behaviour with my
> previous DSP board too.
> 
> 73 Stephen G4SJP
> 
> 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html