[Elecraft] P3 fighting logging and contest programs

[Ken Chandler]

Bryce et al
Look in MENU you can assign a different baud rate to match your logging software, k3.3
I run WT 4.5, wt, k3, p3 set to 9600 baud.
When you run p3 utility for updates etc, your p3 will set itself to 38500 baud for downloading.
When you exit the setup it will go back to default of 9600 baud, which is set in p3 menu.

Ken..G0ORH  k2, k3, p3.

Sent from my iPhone

     


On 24 Aug 2010, at 21:37, k7ua at comcast.net wrote:

> 
> 
> 
> Craig, 
> 
> I'm pretty sure that they are all set to 38K, but I will check to be certain. 
> 
> You have a good suggestion. 
> 
> 
> 
> 73,  Bryce  K7UA 
> 
> I got some goofy results with loggers when I first hooked up mine too.  Then 
> I thought to check the RS-232 data rate settings.  When you install the P3, 
> it defaults to 38 K, and if your loggers are set to some other rate you will 
> get garbage.  Setting them to the same rate cleared things up here.  -  just 
> something else to check. 
> 
> 73  Craig  AC0DS 
> 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html