[Elecraft] Externmal ATU

[Don Wilhelm]

  The "signal" you are seeking in the K3 is a decode of AUXBUS data.  It 
does not exist as a single signal line.

73,
Don W3FPR

On 8/24/2010 10:03 AM, nr4c at widomaker.com wrote:
> The discussion below is one approach, but not the situation I am
> dealing with.  I am looking for a way to access the signal from the K3
> that tells the ATU to TUNE.  I want to use the front panel ATU button
> to start the TUNE process, not a button on the tuner.  Leaving the
> tuner in AUTO mode is an annoyance I really don't like.  There has to
> be a signal that tells the internal ATU to start tuning, so I want to
> acess that signal to send to my LDG or AH-4.
>
> ...bc
>