[Elecraft] [P3] screen freeze.

[Larry - K2GN]

Well, it's still doing the freeze.
I have found it in the "freeze" state 4 times while I'm not operating,
This remains a big mystery. 
I've also had it freeze up while Txing  3 times.  Obviously RF.
Conditions:
P3 on left side of K3, powered off the K3.
Using supplied cables. 
FW - 00.32    K3 FW - 04.05
My plan of attack is:
1. power P3 from external supply.
2. put ferrites on the K3/P3 cables.  All the other cables already have
them.
3. If the condition is still there, move P3 to right of K3.
4. If the condition is still there, PUNT!!! (Any ideas??)

de K2GN - Larry - http://k2gn.com
K3 S/N - 3278    P3 S/N - 51





-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Larry - K2GN
Sent: Thursday, August 19, 2010 7:01 PM
To: alan at elecraft.com
Cc: 'Elecraft - K3'
Subject: Re: [Elecraft] [P3] screen freeze.

To answer everyone that responded

I'm  using .031.
A power off/on brings it back to life.
It stops when I transmit, but only while I transmit.
de K2GN - Larry - http://k2gn.com
K3 S/N - 3278    P3 S/N - 51


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
No virus found in this incoming message.
Checked by AVG - www.avg.com 
Version: 9.0.851 / Virus Database: 271.1.1/3081 - Release Date: 08/19/10
14:35:00