[Elecraft] Overvoltage Protector

[Eric Swartz WA6HHQ - Elecraft]

I'd like to clarify this a bit.

While the K3 does have some protection against over voltage on its supply, we do not garantee it will survive an overvoltage event in all cases. 

73, 
Eric

www.elecraft.com
_..._



On Aug 20, 2010, at 1:00 PM, Scott Ellington <sdelling at facstaff.wisc.edu> wrote:

> Some power supplies, like the Samlex SEC 1235, have no built-in overvoltage protection.  All regulated power supplies are capable of producing much more than their normal output voltage if any one of a number of things fails.  Linear supplies are particularly susceptible, since the pass transistor can short.  
> 
> While Elecraft assures me that the K3 can survive an overvoltage with minimal damage, I prefer to be on the safe side.   So I designed a crowbar circuit, which can be used with any 12 V power supply up to 30A.  If the voltage exceeds the trip point (14-16 V), it will short the power supply output and, if necessary, blow a fuse.
> 
> http://www.ssec.wisc.edu/~scotte/hr/OVP.pdf
> 
> I haven't built this one yet, but a very similar one I built in 1984 worked fine.
> 
> 73,
> 
> Scott  K9MA
> 
> Scott Ellington
> Madison, Wisconsin
> USA
> 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html