[Elecraft] K3 : SSB modulation
Philippe Trottet
TROTTET at unhcr.org
Fri Aug 20 10:57:21 EDT 2010
Hi James,
I'm using MH2 also for Field day opertions and almost same as you, set MIC=2 & COMP=20 TX equalizer has been adjust to my loud voice given preferential to medium high audio. Great
73's
Philippe A65BI
K3#3616
>>> <k2qi.nyc at gmail.com> 20-08-2010 18:54 >>>
Who uses the Elecraft hand mic? I do and mic gain has to be set low; i.e. around 8 or 9 to prevent clipping and flat topping as viewed on a monitor scope. This is with mic sensitivity set to low in the menu. I was once told that the hand mics are a tad hot, but mine seems to be excessively so.
Regardless, my comp is set to 15 or 20 and I get excellent audio reports.
James K2QI
Sent via BlackBerry from T-Mobile
-----Original Message-----
From: Stephen Prior <sjp at sjprior.fsnet.co.uk>
Sender: elecraft-bounces at mailman.qth.net
Date: Fri, 20 Aug 2010 10:21:00
To: elecraft<elecraft at mailman.qth.net>
Subject: Re: [Elecraft] K3 : SSB modulation
I use the Heil MD2 microphone which has an electret element. I have both
compression and mic gain set to 25, and mic set to front panel low with
bias.
I have far more 'talk power' than I have enjoyed with any previous radio.
73 Stephen G4SJP
On 20/08/2010 04:24, "Joseph Trombino, Jr" <w2kj at bellsouth.net> wrote:
>> Hi
>>
>> We are the proud owners of 6 K3/100 used at the FY5KE contest station.
>> These radios has been delivered around mid-2008 and their serial numbers
>> are in the 012xx range.
>>
>> After using mostly these rigs for SSB contesting in FY5KE or in other
>> places, we are still facing a lack of "dynamics", "punch",
>> "penetration", "power", whatever you call it. In other words, when
>> comparing this rig to our radios we previously used (TS-850), with the
>> same microphone (Heil HC-4 element) and the same output RF power, the K3
>> is clearly way behind in term of "average power" we can read on the Bird
>> wattmeter wired on its RF output. Even if observing the wattmeter needle
>> is not a very scientific measurement (we admit it), various comparative
>> reports on the air do confirm our feeling.
>>
>> We spent time on various available settings (mic gain, compressor level,
>> etc), with no luck, excepted a very distorted and awful audio to roughly
>> reach the same level, which is not acceptable.
>>
>> After a little Googling, it appears that other contesters suffers the
>> same issue (e.g. www.bavarian-contest-club.de/projects/K3_english.pdf
>> pages 6 and 10).
>>
>> Some questions :
>>
>> - Do other contesters (or not) here have noted the same problem ?
>> - What settings did you modified (or not) to achieve a good result ?
>> - Is there any possible HW or SW upgrade we aren't aware of, that could
>> help us ?
>>
>> We must confess we are currently preparing our next contest season, and
>> we are seriously considering reselling these radios and bring others
>> Japanese models if we can't solve this problem, despite we really
>> appreciate them in many other aspects (size, weight, etc.).
>>
>> 73
>>
>> For the FY5KE/Win-Test team,
>>
>> Larry - F6FVY
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
More information about the Elecraft
mailing list