[Elecraft] K3 : SSB modulation

[ab2tc]

BTW, the recommended Heil element for the K3 is the "IC" electret element.
This is what I am using with my proset. I am very surprised about the lack
of punch you experience with the K3 transmitter. 

AB2TC - Knut


Laurent HAAS - F6FVY wrote:
> 
> Hi
> 
> We are the proud owners of 6 K3/100 used at the FY5KE contest station. 
> These radios has been delivered around mid-2008 and their serial numbers 
> are in the 012xx range.
> 
> After using mostly these rigs for SSB contesting in FY5KE or in other 
> places, we are still facing a lack of "dynamics", "punch", 
> "penetration", "power", whatever you call it. In other words, when 
> comparing this rig to our radios we previously used (TS-850), with the 
> same microphone (Heil HC-4 element) and the same output RF power, the K3 
> is clearly way behind in term of "average power" we can read on the Bird 
> wattmeter wired on its RF output. Even if observing the wattmeter needle 
> is not a very scientific measurement (we admit it), various comparative 
> reports on the air do confirm our feeling.
> 
> We spent time on various available settings (mic gain, compressor level, 
> etc), with no luck, excepted a very distorted and awful audio to roughly 
> reach the same level, which is not acceptable.
> 
> After a little Googling, it appears that other contesters suffers the 
> same issue (e.g. www.bavarian-contest-club.de/projects/K3_english.pdf 
> pages 6 and 10).
> 
> Some questions :
> 
> - Do other contesters (or not) here have noted the same problem ?
> - What settings did you modified (or not) to achieve a good result ?
> - Is there any possible HW or SW upgrade we aren't aware of, that could 
> help us ?
> 
> We must confess we are currently preparing our next contest season, and 
> we are seriously considering reselling these radios and bring others 
> Japanese models if we can't solve this problem, despite we really 
> appreciate them in many other aspects (size, weight, etc.).
> 
> 73
> 
> For the FY5KE/Win-Test team,
> 
> Larry - F6FVY
> <snip>
> 

-- 
View this message in context: http://elecraft.365791.n2.nabble.com/K3-SSB-modulation-tp5442219p5442701.html
Sent from the [K3] mailing list archive at Nabble.com.