[Elecraft] (K-3) with Yaesu FL-2100B Amplifier

[Chuck - AE4CW]

No ALC connection is required between the K3 and the FL-2100B.  The power
output on the K3 is more than stable enough for the 2100B.  And Elecraft
discourages the use of ALC.  I ran this setup for over a year with no ALC
related problems.

However, you will need an interface to key the amp from the K3 as the amp
keying voltage is not compatible with the K3.  I used a simple 12V reed
relay powered from the K3 12V RCA jack.

Chuck, AE4CW
-- 
View this message in context: http://elecraft.365791.n2.nabble.com/Re-K-3-with-Yaesu-FL-2100B-Amplifier-tp5429724p5437690.html
Sent from the [K3] mailing list archive at Nabble.com.