[Elecraft] K2 Initial Power up

[Don Wilhelm]

Nate,

One other thing to check - pin 1 on the socket for CB U6.  It is easy to 
overlook that round solder pad, the rectangular ones are easy to see.

73,
Don W3FPR

dogbulter wrote:
> I am having an issue powering the K2 on. I am on page 43 of the K2 manual. I
> do not have any display, audio, and I cannot hear any of the relays
> clicking. I measured the power at the dc jack and have 13vdc. I also
> measured the 5vdc and 8vdc power at the regulators. Both were good. I then
> proceded to follow the troubleshooting instructions in the book and
> everything else checks out. I listened to the 4mhz signal on another
> receiver and heard it. 
>
> Please let me know if anyone has any suggestions. 
>
> KA1YMX
>