[Elecraft] K3 TX settings

[Jim McDonald]

Or you can do it with one macro if you use DXLab's Commander rig control
program.  I have one that switches between front and back mic inputs with
different mic gain, compression, and TX EQ.

Jim N7US



-----Original Message-----

Bill,

Right now, the TX EQ settings will be the same for the FP and RP mic 
inputs, so you will have to compromise.  I believe separate setting are 
"on the list", but they have not rippled to the top.

While separate TX EQ settings for the FP and RP inputs would be ideal, 
you could do it in a series of macros from K3Utility.

73,
Don W3FPR



Bill Conkling wrote:
> Hi, 
>
>  
>
> I am proud owner of K3 #4516 and have a question.
>
> I have two mics I like to use.  One is the Yamaha CM-500 headset w/mic.
It
> is plugged into the back of the K3  (CONFIG/RPL Bias).  I have worked to
get
> the audio sounding like I want it and have determined the gain and comp as
> well as the setting for the TX equalizer.
>
> I also have a Heil HM-10 Dual mic plugged into he front (FPH no bias) with
a
> Heil Kenwood connector.  I haven't spent much time with this combo as yet.
>
> I would like to know if it's possible to store the mic settings for these
> two mics so that I don't have to reset all the parameters manually.
>
> If it's possible, be specific as I'm very new to this rig and am learning
as
> I go.