[Elecraft] Slowed RS-232 with P3 installed
Jim Cox
jcox123 at bellsouth.net
Sun Aug 15 12:39:37 EDT 2010
Whatever was done to 00.31 seems to have affected the operation of Logger32
software and the P3.
I can use 00.28 with no problems or turn the P3 off with 00.31 and that
cures the problem.
Jim K4JAF
----- Original Message -----
From: "W4CCS" <w4ccs at w4ccs.com>
To: <elecraft at mailman.qth.net>
Sent: Saturday, August 14, 2010 1:39 PM
Subject: Re: [Elecraft] Slowed RS-232 with P3 installed
>
>
> Thanks to Darin, K6OSX, uploading and installing the beta firmware
> v00.31 fixed the problem.
>
> W4CCS
>
> On 8/14/2010 11:41 AM, W4CCS wrote:
>> Has anyone noticed how the reaction time between the K3 and HRD has
>> slowed considerably since installing the P3..??
>>
>> The commands were instantaneous before and now the K3 takes 2 to 3
>> seconds to react to any band change or other commands from HRD.
>>
>> I have several things that use the RS-232 port:
>>
>> 1 - Microham Keyer II
>> 2 - Microham Station Master
>> 3 - P3
>> 4 - Palstar Auto-Tuner (In listen mode)
>>
>> W4CCS
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
More information about the Elecraft
mailing list