[Elecraft] P3 Cursor Position

[Joe Subich, W4TV]

Phil,

 > Regarding the P3, I am a little confused about the cursor position.
 > For VFO A, I understand this to be the Cyan colored U bracket like
 > thing at the center bottom of the spectrum display.

VFO A is the WHITE "U bracket like" cursor.  VFO B is the Cyan colored
cursor.

73,

    ... Joe, W4TV

On 8/15/2010 1:07 AM, Phil Hystad wrote:
> Regarding the P3, I am a little confused about the cursor position.
> For VFO A, I understand this to be the Cyan colored U bracket like
> thing at the center bottom of the spectrum display.
>
> Last night I was playing around with how this is affected by filter
> width and also passband shifting.  Now, I believe that when I had the
> passband shift in the normal position with a 2.8 KHz filter width
> that my LSB signal showed the Cyan cursor being lined up right on the
> center frequency with the right side of the cursor border.  But
> today, I am noticing that the cursor overlaps the center position a
> little bit.  Still LSB, normal position on passband shift and also
> the same filter width of 2.8 KHz.
>
> So, this seems like different behavior and I am not sure which way is
> supposed to be the correct way.
>
> Can someone explain how this is supposed to be and how it might be
> affected by various controls.  I am wondering if there is some
> control setting that might be different to show different behavior.
>
> Thanks for your help.
>
> 73, phil, K7PEH
>
> ______________________________________________________________
> Elecraft mailing list Home:
> http://mailman.qth.net/mailman/listinfo/elecraft Help:
> http://mailman.qth.net/mmfaq.htm Post:
> mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this
> email list: http://www.qsl.net/donate.html
>