[Elecraft] Slowed RS-232 with P3 installed

[Jim Cox]

I am using MicroKeyer II with Logger32 here and so no difference since I 
added the P3.   Must be something to do with HRD.

Jim K4JAF


----- Original Message ----- 
From: "W4CCS" <w4ccs at w4ccs.com>
To: <elecraft at mailman.qth.net>
Sent: Saturday, August 14, 2010 10:41 AM
Subject: [Elecraft] Slowed RS-232 with P3 installed


> Has anyone noticed how the reaction time between the K3 and HRD has
> slowed considerably since installing the P3..??
>
> The commands were instantaneous before and now the K3 takes 2 to 3
> seconds to react to any band change or other commands from HRD.
>
> I have several things that use the RS-232 port:
>
> 1 - Microham Keyer II
> 2 - Microham Station Master
> 3 - P3
> 4 - Palstar Auto-Tuner (In listen mode)
>
> W4CCS
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html