[Elecraft] {k3} PSK31 tuning

[Lyle Johnson]

  The K3's PSK encoder and decoder (used in DATA: PSK D mode) uses  a 
pitch just above 1,000 Hz.

If you narrow the badnwidth and use the CWT feature, you'll get the PSK 
signal.  YOU can use the SPOT function in conjunction with the CWT 
indicator in this mode as described in the K3 manual.

For RTTY, you have choices for the MARK tone using the PITCH button 
while selecting DAT AFSK or DATA FSK modes.  You must manually tune the 
RTTY signal using the tuning indicator as described in the K3 manual.  
The MARK pitch you choose need not be the same the MARK pitch used by 
the sending station.

73,

Lyle KK7P

> I share the same challenges with PSK and RTTY decoding....