[Elecraft] {k3} PSK31 tuning

[Lyle Johnson]

  1) Use CWT.

2) Use a narrow filter.  Once you find the station you want to copy, 
tighten the filter and retune as necessary.  50 Hz is not too tight.  
300 Hz is too wide.  If you are hearing two stations, then the 
selectivity is not tight enough.

3) Use auto-spot.  You may have to hit it two or three times.  Tuning is 
critical and an error of more than 5 Hz changes from solid copy to no copy.

73,

Lyle KK7P

> How does one tune PSK31 on the K3 such that the built in decoder can
> read it...