[Elecraft] P3 Ref Cal step size

[Alan Bloom]

> Date: Wed, 11 Aug 2010 12:08:04 -0700
> From: btippett at alum.mit.edu
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] P3: a modest proposal for QSY

...
> The P3's Ref Cal steps in the menu are 10 Hz but that's close enough
> for accurately QSYing to even a 50 Hz bandwidth.

It's actually the 60 MHz reference that is being adjusted in 10 Hz
steps.  At the 8.215 MHz IF, that equates to about 1.4 Hz steps.

Alan N1AL