[Elecraft] Amplifier

[Robert Friess]

If the SPE does that, which is 17dB gain, then it does not conform to FCC
rules that limit gain to 15dB.

Bob, N6CM

On Tue, Aug 10, 2010 at 12:37 PM, W4GRJ <w4grj at satterfield.org> wrote:

> Depends on the Amplifier, I have a SPE Expert 1K-FA.....10watts drive = 500
> watts out
>
> Jack
> W4GRJ
>
>
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Lyle Johnson
> Sent: Tuesday, August 10, 2010 1:33 PM
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] Amplifier
>
>
> > ...I presently have a K3 10 and am wondering if the 10 watts will be
> enough to kick the new amp
>
> Yes, it will.  You'll likely get more than 100 watts but less than 200
> watts output with 10 watts of drive.  If you want the full 500+ watts,
> then you'll probably need 30W to 40W of drive.
>
> 73,
>
> Lyle KK7P
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>