[Elecraft] Button HOLD time

[Tom W8JI]

Thanks Ian, that was helpful!


----- Original Message ----- 
From: "Ian White GM3SEK" <gm3sek at ifwtech.co.uk>
To: <elecraft at mailman.qth.net>
Sent: Tuesday, August 10, 2010 2:52 AM
Subject: [Elecraft] Button HOLD time


> Don Wilhelm wrote:
> 
>>I can't help with eliminating the ATT hold button.
> 
> But Elecraft could. How about this?
> 
> "CONFIG:HOLDDLY. Increases the HOLD time required to activate secondary 
> functions of push buttons and knobs. Minimum (and default) is 0.5 
> seconds. Further option: for extra-long HOLD times on the BAND and MODE 
> rocker buttons, tap [1] to multiply the selected HOLD time by 1.5; tap 
> [2] to multiply by 2; tap [0] to reset BAND and MODE buttons to the same 
> HOLD time as all others (default). For further protection against 
> accidental activation of HOLD functions, see CONFIG:SW TONE and 
> CONFIG:PWR SET (tap [1] to lock)."
> 
> 
> Any K3 owner who hosts a multi-op station will understand why.
> 
> 
> -- 
> 
> 73 from Ian GM3SEK
> http://www.ifwtech.co.uk/g3sek
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html