[Elecraft] [P3] Display bug ...

[Joe Subich, W4TV]

Thanks Bill.

73,

    ... Joe, W4TV


On 8/8/2010 10:14 PM, Bill W4ZV wrote:
>
>
> Joe Subich, W4TV-4 wrote:
>>
>>
>>
>> There is a repeatable problem in the P3 display of the "bandwidth"
>> cursor in AFSK A and FSK D data sub-modes.  In both submodes the
>> VFOs (correctly) display the RF frequency of the MARK (as set by
>> "Pitch").  However, the P3 displays the filter limits as if the
>> mark frequency were always set to 915 Hz,  that is it does not
>> make use of the IS; data from the K3.  Instead P3 appears to ignore
>> IS in AFSK A and FSK D (uses a fixed IS=1000).  This results in a
>> display error of -(IS - 1000) for other mark frequencies.
>>
>> The error does not appear to be related to the choice if PB Control
>> (0.5 | 0.1) or the use of the K3 extended command set by any external
>> software.
>>
>> K3 FW 4.05, P3 FW 0.28
>>
>
> This was fixed in 0.29.  QRX for public release.
>