[Elecraft] Problem connecting LP_Bridge through the P3 to the K3

[gary bartlett]

Hi, Ted:

	Yes, the LP-Bridge requires one to keep the P3 turned off until the
end.

	LP-Bridge is not required, of course, but I had left mine in play
because I originally was running the P3 and the LP-PAN in parallel and
hadn't gotten around to reassigning COM ports to my logging programs when I
disconnected LP-PAN.   I was still using that configuration when I tripped
over what you report.  

	I suppose the good news is that if anyone has LP-Bridge installed
for what ever reason, the P3 doesn't mind so long as you do what one always
has to do:  set up the virtual ports first.

	73,
	Gary, VE1RGB

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Ted Roycraft
Sent: August 7, 2010 6:31 PM
To: Elecraft at mailman.qth.net
Subject: [Elecraft] Problem connecting LP_Bridge through the P3 to the K3

I tried to connect LP_Bridge passing through the P3 to the K3
............... Has anyone else run into this?

73, Ted, W2ZK
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html