[Elecraft] K3: Use AM SYNC on WWV to calibrate DDS?

[Bill Conkling]

K1LI <nekvtster at gmail.com> wrote:

>
>AM-S in FW 3.97 works great. I notice that my frequency displays 15.000.024
>when tuning in WWV on 15MHz and 10.000.16 on the 10MHz signal. (Happily, the
>displayed frequency is the same on both "sidebands.") The ratio of the
>15MHz/10MHz received frequencies is equal to the ratio of the 24Hz/16Hz
>difference between the displayed readings and the "actual" signal
>frequencies (I trust WWV!).
>
>Is there a lesson here that I can use to improve the frequency calibration
>of my K3?
>
>73 -- Brian -- K1LI
>-- 
>View this message in context: http://elecraft.365791.n2.nabble.com/K3-Use-AM-SYNC-on-WWV-to-calibrate-DDS-tp5074859p5074859.html
>Sent from the Elecraft mailing list archive at Nabble.com.
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>