[Elecraft] K3 Firmware 4.05

[Steve Ellington]

Tom:

Yep....That's the way it's supposed to work or at least until they make more 
refinements. When in QRQ mode, the Shift knob doesn't change anything.
I'm still waiting for RIT to start working when in QRQ mode.
Steve
N4LQ
----- Original Message ----- 
From: "Tommy Alderman" <aldermant at windstream.net>
To: <elecraft at mailman.qth.net>
Sent: Wednesday, August 04, 2010 12:29 PM
Subject: [Elecraft] K3 Firmware 4.05


> While I have found that QRQ works excellent with both 4.03 and 4.05 
> firmware
> versions, I think I have a new problem with 4.05. I have programmed QRQ
> ON/OFF into the PF1 button. In addition to the fully explained 
> RIT/XIT/Split
> issues, now when I execute QRQ ON, my HIGH CUT/WIDTH buttons switch from
> LO/HI to SHIFT/WIDTH. When I tap the SHIFT knob, FC *0.58 is displayed in
> the VFO B area. When I tap the WIDTH knob, BW  0.40 displays in the VFO B
> area. I can no longer get either of these knobs to revert back to LO/HI.
> Once I turn QRQ to OFF, those buttons go back to 'normal' operation.
> NOTE: Having just received my K3 (s/n 4521) on Monday 8/2, it is entirely
> possible I have something else set incorrect or have not read about this
> issue with 4.xx firmware.
> Tom - W4BQF
>
>
>
>


--------------------------------------------------------------------------------


> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html