[Elecraft] IF display while xmitting

[Brian Alsop]

I use an SDR here connected to the K3 IF.

SKIMMER or ROCKY run off this SDR.

When I transmit the my displayed xmit signal appears 800 Hz above the 
station I'm zero beat with.  This is regardless if normal or REV CW is used.

My pitch is set to 500 Hz.  The station being received is producing this 
pitch.

I don't understand this at all.

The "IF frequency" in the SDR's must be set right.  Clicking on a spot 
puts me right on that stations frequency.

73 de Brian/K3KO