[Elecraft] KAT3 tuning bandwidth

[Guy Olinger K2AV]

If the feedline antenna combination is such that a 1.5:1 segment is
only 20 kHz wide (a common enough occurrence) then one should take the
time to get tunings up and down.  You can probably do it in a couple
of minutes.  The K3 will shift seamlessly with your operating after
that.  One of the benefits.

73, Guy.

On Sun, Aug 1, 2010 at 3:10 PM, Steef PA2A <pa2a at xs4all.nl> wrote:
> Hi,
>
> On 80 meters I did some tuning and when I try the SWR about 12 KHz lower the tuner produces an extra click and the SWR is terrible again. It seems the tuner remembers segments of about 20 KHz.
>
> Is it possible to keep the tuner in its tuned settings so it is not necessary to tune the complete band in 10 or 20 KHz steps?
>
> 73 's
>
> Steef PA2A, K3 # 4654
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>