[Elecraft] K2 cannot be swithed ON properly.

[Brian Mury]

On Wed, 2009-09-23 at 08:26 -0400, Don Wilhelm wrote:
> That sounds like your K2 may have 2 problems.
> 1) It is going into transmit immediately after power-on

I've had this happen in SSB mode with the VOX turned on because the mic
was picking up a steady noise (such as a computer fan). It's easy to
check - unplug the mic!

Could also be a PTT signal from an external source such as a PSK31
interface.

Check the easy stuff first!