[Elecraft] Decoder for use with K3 and PW-1

[John Gaynard]

It also works with a Microham MKII.  I use it with a K3 and the PW-1.  The
K3 has to be on Input1.

John K8WDN

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of gdaught6 at stanford.edu
Sent: Thursday, September 10, 2009 11:10 AM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] Decoder for use with K3 and PW-1

Joe wrote...

> Unfortunately the PW-1 will only work with Icom serial 
> (CI-V) data.  It does not respond to the old stepped 
> DC voltage like the 2-KL and 4-KL.  

If one takes a look at the manual for the PW-1, it apparently has provision
for the 
"old stepped DC voltage" as well as for the CI-V.  Both the ACC-1 and ACC-2 
connectors have a band data signal.  But maybe it doesn't work for some
reason[??]

73,

 George T Daughters, K6GT
CU in the California QSO Party (CQP)
October 3-4, 2009


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html