[Elecraft] K2 Monitoring outgoing PSK31 Signal

[Julian, G4ILO]

KM4VX wrote:
> 
> I have searched the archives but cannot find anything concerning how to
> monitor the outgoing PSK31 signal from the K2. In the PRO3 one just pushes
> the "Monitor" button. I am using the SignaLink USB interface with Digipan
> software at 5 watts. I would like to check my outgoing audio. Thanks. Ron
> 
There is no audio monitor on the K2. In any case, it is really the
trasnmitted signal you need to monitor to check your IMD. If you have no
more than one bar of ALC showing in "r" mode then the IMD should be very
good at 5 watts.

There used to be a very useful tool called the IMD Meter designed by KK7UQ
which you could buy from US Interface. Sadly it appears to be no longer
available since the owner of US Interface became a SK. You can still find
information about it if you use Google. If anyone knows where you can still
get these things I'd like to know, because I have one and wrote about it on
my website, and I'm often asked where you can get them from.

-----
Julian, G4ILO. K2 #392  K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html

-- 
View this message in context: http://n2.nabble.com/K2-Monitoring-outgoing-PSK31-Signal-tp3693487p3694036.html
Sent from the Elecraft mailing list archive at Nabble.com.