[Elecraft] K3 Mode

[Evert Bakker (PA2KW)]

Hello Don,

It was the software (HRD) that did it for me. 
But it's good to see that at the end WE do have control over the radio :-)

73's, Evert PA2KW

-----Original Message-----
From: Don Wilhelm [mailto:w3fpr at embarqmail.com] 
Sent: Sunday, September 13, 2009 18:13
To: evert at pa2kw.com
Cc: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3 Mode

Evert,

You inadvertently switched to USB.  The way to do it by intent is to 
hold ALT (yes, the MODE down button (you must have tapped for longer 
than a tap).

Only one of the sidebands is shown for any one band - same way for CW 
and DATA modes - if you want to change to the opposite sideband, hold 
ALT - the  K3 remembers  that setting per band, per VFO.

73,
Don W3FPR

Evert Bakker (PA2KW) wrote:
> Problem solved. I think the LSB mode is somewhere disabled for 14 Mc.
>
> By toggling the mode (up) I didn't get the USB Mode. (For some unknown
> reason I'm always toggling up until I get what I want).
>
> By toggling down I did get back the USB mode.
>
>  
>
> Wheird
>
>  
>
> 73's, Evert PA2KW
>
>   
>