[Elecraft] Decoder for use with K3 and PW-1

[Dick Dievendorff]

I own a PW-1. the stepped voltage doesn't distinguish between 10 and  
12 meters or 15 and 17 meters. I think the voltage is there to switch  
an EX 627.

Dick, K6KR


Sent from my iPhone

On Sep 10, 2009, at 8:10 AM, gdaught6 at stanford.edu wrote:

> Joe wrote...
>
>> Unfortunately the PW-1 will only work with Icom serial
>> (CI-V) data.  It does not respond to the old stepped
>> DC voltage like the 2-KL and 4-KL.
>
> If one takes a look at the manual for the PW-1, it apparently has  
> provision for the
> "old stepped DC voltage" as well as for the CI-V.  Both the ACC-1  
> and ACC-2
> connectors have a band data signal.  But maybe it doesn't work for  
> some reason[??]
>
> 73,
>
> George T Daughters, K6GT
> CU in the California QSO Party (CQP)
> October 3-4, 2009
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html