[Elecraft] K3 Power Output

[Bill Maddock]

Trev,

   Sounds like a typical K3, both of mine will react very similar especially if I change bands. I will typically hit the tune button
and adjust my power if necessary. Now perhaps if I went through
the transmitter calibration it would go away! I still need to
do all the mods on my first K3 sn# 1059. Nonetheless I am curious
for a response on this one

73 de Bill N4ZI  K3's #1059 & #2914

--- On Tue, 9/1/09, trev <trev.waters at btinternet.com> wrote:

> From: trev <trev.waters at btinternet.com>
> Subject: [Elecraft]  K3 Power Output
> To: elecraft at mailman.qth.net
> Date: Tuesday, September 1, 2009, 5:33 PM
> 
> It's been a long time since I made a post to this group so
> hope someone can
> help.
> My K3/100 which has all the latest firmware installed
> behaves oddly. When
> the TX is keyed with
> the mic the power out only goes to approx 30watts although
> it is set to
> 100watts. Then it seems
> to slowly build when the mic is keyed a few times. Maybe I
> am missing
> something or have a parameter set wrong in a menu. 
> I would appreciate any thoughts or ideas. Thanks in
> advance.
> Trev GW4IMC 
> -- 
> View this message in context: http://n2.nabble.com/K3-Power-Output-tp3563445p3563445.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>