[Elecraft] K3 Serial Port Connections

[Don Wilhelm]

John,

That is actually up to the user to determine.  It does require an 
interim intelligent device.
Check out LP-Bridge or several other serial port sharing applications 
that run on your PC.
The K3 is a terminal device, it does not provide control for all RS-232 
based communications.  Refer to the K3 Programmer's Reference to see the 
data that is sent to/from the K3.

73,
Don W3FPR

John Lally wrote:
> How do you connect a K3 to antenna rotator, a computer, a transceiver
> controlled amplifier and a stepper transceiver controlled antenna via the
> one serial port on the K3?
>   
>