[Elecraft] K3 DATA question

[W6NEK]

Hi John,
I think your missing info on the K3 "CW-to-Data" mode function.

You can use data modes completely stand-alone (i.e., without a computer). 
Just turn on text decode, and send CW using the internal keyer.  The CW will 
be transmitted as PSK-31 or RTTY depending on which mode you selected.
(See page 34 of K3 Owners Manual Rev D4)

73,
Frank - W6NEK

----- Original Message ----- 
From: "VE3NFK" <john.turgoose at gmail.com>
To: <elecraft at mailman.qth.net>
Sent: Saturday, October 31, 2009 4:27 PM
Subject: [Elecraft] K3 DATA question


>
> Hello
>
> Playing around listening to PSK / Pactor some Hell  etc and works fine in
> both USB and DATA modes...
>
> I touched my key by accident when in DATA mode; and I started transmitting
> what sounds like PSK...
> I had to press the XMIT button to stop (first time I just powered off the
> K3)... I am using MultiPSK - but it makes no difference if it is running 
> or
> not. (Doesn't do it in USB and CW works normally)
>
> What am I missing?
>
> Thanks and 73  John VE3NFK
>
> -- 
> View this message in context: 
> http://n2.nabble.com/K3-DATA-question-tp3925543p3925543.html
> Sent from the Elecraft mailing list archive at Nabble.com.