[Elecraft] K3 Screen

[chen dave]

    Yes, LP-Bridge works very well.
    Only issus I met is when I set K3's RS232 port for PTT/CW,and use
SpectraVue(SDR-IQ),
because SpectraVue always set RTS/DTR to high. so K3 will enter the transmit
mode.
     Several months ago, I wrote an email to Larry N8LP, ask if it is
possible to provide a function to set given virtual port's DTR/RTS to low.
Larry told me he will put this into requirement list.

73 de ba4rf/David

On Wed, Oct 28, 2009 at 11:02 PM, Robert Beard <rl_beard at bellsouth.net>wrote:

> Hi Joe,
>
> Each of these apps requires its own serial port - a dilemma, since the K3
> has only one....
>
> One solution is to install LP_Bridge. (See the LP-PAN site.)
> This app connects SDR to the K3 and provides three additional virtual
> ports.
> We are using it here at the ranch to run SDR, Skimmer, and N1MM
> simultaneously.
>
> 73
>
> Rob, N6VX
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>