[Elecraft] k3 MACRO

[Dick Dievendorff]

Diversity On is DV1; not DV2;

I don't think you want to also link VFOs with diversity on. As I understand
diversity, both main and sub receivers are controlled by VFO A.

Therefore you shouldn't need to equalize or link the VFOs.

If in a subsequent macro you want to turn on VFO linking, it's LN1; not LN2;


So to turn on diversity you need this macro: DV1;

There's an example that includes turning on diversity in the "Sample Macros"
section of K3 Utility Help. It is in the help text for the command tester/K3
Macros tab page.  I put all the programmer's reference samples in Help and
you can copy and paste them in to your Macro Editor.

Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Bill K9YEQ
Sent: Wednesday, October 28, 2009 3:49 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] k3 MACRO

I missed including the Macro:

SWT13;SWT13;SB1;DV2;LN2

I would like use the following command to make sure the SUB is in diversity
mode and get the VFO's to match and be linked.  I can execute and get the
A=B but the rest doesn't work.  Suggestions!

 
Bill
K9YEQ
K2-#35 (2 more), KX1-#35, K3, TS2000, IC7000, etc.




______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html