[Elecraft] K3 switch macro update

[PA3CW]

My idea was to just use the same button to toggle on and off :), so that
would not cost another programmable button. Don't know if this is possible
Tks,

Dick PA3CW


Greg - AB7R wrote:
> 
> Very true.  But just exiting split your modes will already be the same
> from your 
> previous macro execution.  The only thing potentially lacking would be the 
> equalization of the VFOs.  But that does not really matter unless you are
> going to 
> go into split again.  And if you are, you will probably use your macro
> again which 
> will set it all up for you anyway.
> 
> To me it seems just exiting split would be easier and save a button for
> another 
> macro.
> 
> -------------------------
> 73,
> Greg - AB7R
> Whidbey Island WA
> NA-065
> 
> 
> On Tue Oct 27  9:19 , Chuck Guenther <charles9415 at att.net> sent:
> 
>>Greg - AB7R wrote:
>>> Or just a HOLD of the SPLIT button to turn it off??? 
>>>
>>>
>>>
>>>   
>>
>>
>>Of course  that will work, Greg; however the UNSPLT macro has the
>>advantage of equalizing VFO A and B frequencies and bandwidths and
>>undoing the split with a single keystroke. 
>>
>>73,
>>Chuck  NI0C
>>K3 s/n 1061
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
> 

-- 
View this message in context: http://n2.nabble.com/K3-switch-macro-update-tp3899823p3900554.html
Sent from the Elecraft mailing list archive at Nabble.com.