[Elecraft] Elecraft] K3 PB Ctrl Shift .01/.05

[Joe Subich, W4TV]

> If you're inclined to use a rig control program, DXLab's 
> Commander now has very nice slider controls for adjusting the 
> K3's bandwidth and shift.  It only takes a click of the mouse 
> to change between 10 Hz and 50 Hz increments. (DXLab is free!)

The 10 Hz/50 Hz radio button in DXLab's Commander does not 
change the operation of the radio.  It only changes the steps 
used by Commander.  

73, 

   ... Joe, W4TV 
 


> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Chuck Guenther
> Sent: Tuesday, October 27, 2009 10:26 AM
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] Elecraft] K3 PB Ctrl Shift .01/.05
> 
> 
> Derw, AF2Z, wrote:
> "I use both .01 and .05. It's just a little inconvenient when 
> changing from one to the other and the WIDTH gets reset to 
> 400 Hz every 
> time."
> 
> If you're inclined to use a rig control program, DXLab's 
> Commander now has very nice slider controls for adjusting the 
> K3's bandwidth and shift.  
> It only
> takes a click of the mouse to change between 10 Hz and 50 Hz 
> increments. (DXLab is free!)
> 
> 73,
> Chuck Guenther  NI0C
> K3 s/n 1061 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html