[Elecraft] K3: Macro Switch Customization

[Dick Dievendorff]

I plan to put a number of macros into K3 Utility Help that can be used as
starting points.  You'll be able to copy/paste the example macros. 

Each macro will come with an annotated description that explains what each
command does.  The details will require reference to the Programmer's
Reference, you'll probably want to consult the programmer's reference
description for those commands you change.

The newer versions of the K3 Programmer's Reference have quite an
introductory section that helps explain what do to and why you might want to
do it.  

Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of J.A. Wolf, MD, K6JW
Sent: Monday, October 26, 2009 9:46 AM
To: elecraft at mailman.qth.net
Subject: [Elecraft] K3: Macro Switch Customization

   The macro switch customization ability is highly attractive but, for this
K3 newbie and non-engineer, a bit confusing. I've looked over the
programmers' guide but, frankly, it would be really helpful if Wayne or
someone at Elecraft would provide a step by step example in plain English
for how to implement, say, one of the split options so that we less capable
folks could learn the principles of what to type and where to type it. In
other words, what I (and maybe some others?) need is "Macros for Dummies".
Please?
Jeff, K6JW
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html