[Elecraft] [K3] Request: Mic up/down buttons for band up/down

[Wayne Burdick]

AM sync is likely by the end of next week (at least for field test).

TCXO compensation is partway there: you can now enter your 1-PPM TCXO  
data into K3 Utility, which sends the data to the K3.

The firmware end of this will be more time consuming, based on my  
initial experiments. Since the 1-PPM TCXO is already meeting our  
original spec for firmware-based compensation (0.5 PPM from 0-50 C),  
I've been holding off on this while finishing other tasks. When I get  
back to TCXO compensation, I'll have a tighter target (0.25 PPM from  
0-50 C).

Wayne

On Oct 25, 2009, at 9:49 AM, Dave G4AON wrote:

> The menu of the K3 is getting too complex, there are already hidden
> items which aren't obvious (like pressing "1" or "4" in some menus).  
> My
> vote is to stick with the basics.
>
> Can we let Wayne finish off items like synchronous AM and TCXO
> temperature calibration, both of which are in the manual and have been
> for 2 years. Wayne is too easily sidetracked as it is!
>
> 73 Dave, G4AON
> K3/100 #80
> -----------------
> I use a Yaesu MD100A8X to my K3. The up/down buttons works fine for
> frequency
> up/down.
> My request: Selectable use of the buttons, I would like to have band
> up/down.
>
> 73 de Jan SM5FQQ K3 #2054
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html