[Elecraft] K3 SCAN NOW Switch Macro

[Joe Subich, W4TV]

Note:  you may want to use another memory (e.g., 99) if you 
are using memories 0-9 for Band Sel.  

This macro may not work if you are using software that polls 
the K3 rapidly (e.g., Ham Radio Deluxe).  

73, 

   ... Joe, W4TV 
 

> 
> On Oct 24, 2009, at 12:05 PM, drewko <drewko1 at verizon.net> wrote:
> 
> Here is a macro that will immediately scan the range from 
> VFOA through VFOB, without having to first do the M->V/ V->M, 
> etc. sequence as is normally required for a new SCAN. The macro 
> automatically stores the scan range in M4. VFOA should be lower 
> in freq than VFOB. The macro can scan in unsquelched mode (AF 
> ON) by holding the assigned macro key for a long push (just 
> as with the SCAN key).
>
> Macro sequence:
> V->M
> M4
> M->V
> M4
> SCAN
>
> Macro Text: SWT15;;;;;SWT39;;;;;SWT23;;;;;SWT39;;;;;SWH41;;;;;
> (Note, the extra semicolons are required for delay timing.)
>
>
> 73,
> Drew
> AF2Z