[Elecraft] K3 PLL-1 error

[The Smiths]

Make sure that you put the split lock washer spacer between the synth board and the stand off.  I've seen too many cases where people ddn't take the time to put that in, or did it incorrectly and have crushed the SMD Resistor near the screw hole.  Pull your board off and make sure you don't have a small crack in the resistor.  This could be causing this intermitant problem you're seeing.
 
> To: Elecraft at mailman.qth.net
> From: rfenabled at gmail.com
> Date: Sat, 24 Oct 2009 09:49:43 +0000
> Subject: [Elecraft] K3 PLL-1 error
> 
> Hi,
> 
> I have done the CAL VCO again and for now, so far, the issue appears to have gone and the K3 is acting normal
> 
> Thanks to all for the help, you guys are great
> 73's
> Gary
> Sent via BlackBerry® from Telstra
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
 		 	   		  
_________________________________________________________________
Windows 7: It works the way you want. Learn more.
http://www.microsoft.com/Windows/windows-7/default.aspx?ocid=PID24727::T:WLMTAGL:ON:WL:en-US:WWL_WIN_evergreen2:102009