[Elecraft] K3 PL 1 error

[rfenabled at gmail.com]

Hi,

I removed the top covers and checked the TMP cables and repowered the radio. Error message did not display.

Tuned down the band and there are soft pops occurring while tuning and. The audio was blanked until it suddenly returned after trying to key the radio.

At first it would not produce RF but all of a sudden the TX returned and the Rx started indicating signal strength

When the fault is active there is no indication at all on the S meter

Any assistance appreciated

#679
FW ver 3.41

73's
Gary
VK4WT/P
Sent via BlackBerry® from Telstra