[Elecraft] K2 #6815 - VFO Linearization CAL PLL Info 232

[Don Wilhelm]

Gary,

OK, it may be C71 - my memory is not perfect and I don't have access to 
the schematics here while on vacation.
Plug the internal counter probe into TP1 and check the frequency with 
CAL FCTR.  If you are tuned to 7100 kHz, the counter should read close 
to 12015 kHz.

You might also want to re-check the PLL Reference oscillator range 
(probe in TP3).

73,
Don W3FPR

Gary W. Marklund wrote:
> Don,
>
> Yes, I did all that. Just checked it. My instructions say it is C71 not 
> C73 that is changed. Other than that, all is as you say.
>
> Gary
>