[Elecraft] K3 Audio Volume

[DC1RS]

Just a thought, but maybe it is a bad relais in the ATU?
I had once problems with higher SWR at 10m although the antenna was ok.
Cycling the ATU on/off cured this problem.

73 de Roland, DC1RS

 

rfenabled wrote:
> 
> Hi
> 
> Again today I had soft audio when I turned the K3 on.
> 
> I pressed the ATU button and the volume became loud and has remained at
> that level.
> 
> Here are the settings.
> 
> 7.102.00 LSB
> Width. 2.50
> FC 0.50
> Hi. 1.75
> LO. 0.00
> Filter 2.1 8 pole
> (Others installed are also 8 pole 13,6,2.8 and 400)
> Antenna is 80M full wave loop and has a 1.2:1 dip on this frequency)
> AF knob was at quarter PAST the hour as the audio is generally very low
> and has been for a long time.
> 
> After the change in volume it sounds great at the 11 o'clock position.
> 
> FW ver 3.41
> 
> Hope this helps someone figure out what may be causing this up/down audio
> change.
> 
> K3/100 #679
> 
> 73's
> Gary
> VK4WT/P
> Sent via BlackBerry® from Telstra
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
> 


-----
K3/100 #1243, KFL3A-2.8K, KFL3A-2.1K, KFL3A-400, KRX3, KFL3A-2.8K, KFL3A-400,
KAT3, KXV3A
-- 
View this message in context: http://n2.nabble.com/K3-Audio-Volume-tp3870485p3870564.html
Sent from the Elecraft mailing list archive at Nabble.com.