[Elecraft] KE8UW Re: Just finished K2 and finals look to be oscillating at 450KHz...

[Don Wilhelm]

Chuck,

Spectrogram version 5.17 is freeware and matches the screenshots for setup.
See the information (and download) at Tom Hammond's website www.n0ss.net.
If you want extended information about K2 dial calibration and filter 
setup, take a look at my website article on K2 Dial Calibration - 
www.w3fpr.com

73,
Don W3FPR

C. J. Hawley wrote:
> Thanks so much for the help. The problem was C120...the one in the middle between two close in caps. Hard to see the value. Had to get serious and bend one over. Figures it would be that one. I had the value .001uF instead of .01uF.
> You were so correct. Made me look closer. 
> Thanks for your patience, ability, and experience.
> The alignment seems to be going well so far. Perfect tuning wand for those inductors. All done on that and buttoned up. All works and works well. I need to do the filters now...maybe Spectrogram. I'm a little confused if it is free or what, but I'll figure it out. 
> I have made use of the latest manual on line for some of the later clarifications and info. Thanks for having these on line.
> And thanks Don and Michael for your suggestions along these same lines.
> Chuck, KE9UW
>   
>